KR Core Implementation Guide
1.0.0 - STU1 Korea, Republic of flag

KR Core Implementation Guide - Local Development build (v1.0.0). See the Directory of published versions

Resource Profile: KRCore_AllergyIntolerance - Detailed Descriptions

Draft as of 2021-11-14

Definitions for the krcore-allergyintolerance resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. AllergyIntolerance
InvariantsDefined on this element
krcore-alrg-01: 알레르기 및 불내성 반응이 의약품에 의해 유발된 경우, 원인물질을 WHO ATC 코드로 식별. (: (category = 'medication') implies code.coding.where(system ='http://www.whocc.no/atc').exists())
2. AllergyIntolerance.clinicalStatus
3. AllergyIntolerance.category
4. AllergyIntolerance.code
Control10..1
Is Modifiertrue
Must Supporttrue
5. AllergyIntolerance.code.coding
Control0..?
SlicingThis element introduces a set of slices on AllergyIntolerance.code.coding. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
6. AllergyIntolerance.code.coding:ATC
SliceNameATC
Control0..1
BindingThe codes SHALL be taken from ATC Codes
Must Supporttrue
7. AllergyIntolerance.code.coding:ATC.system
Control1..?
Must Supporttrue
Fixed Valuehttp://www.whocc.no/atc
8. AllergyIntolerance.code.coding:ATC.code
Control1..?
Must Supporttrue
9. AllergyIntolerance.code.text
Control0..?
10. AllergyIntolerance.patient
TypeReference(KRCore_Patient|Patient)
11. AllergyIntolerance.onsetDateTime
Control0..1
TypedateTime
12. AllergyIntolerance.reaction
13. AllergyIntolerance.reaction.manifestation
14. AllergyIntolerance.reaction.manifestation.text
Control0..?

Guidance on how to interpret the contents of this table can be found here.

1. AllergyIntolerance
Definition

Risk of harmful or undesirable, physiological response which is unique to an individual and associated with exposure to a substance.

Control0..*
Summaryfalse
Alternate NamesAllergy, Intolerance, Adverse Reaction
Comments

Substances include, but are not limited to: a therapeutic substance administered correctly at an appropriate dosage for the individual; food; material derived from plants or animals; or venom from insect stings.

InvariantsDefined on this element
ait-1: AllergyIntolerance.clinicalStatus SHALL be present if verificationStatus is not entered-in-error. (: verificationStatus.coding.where(system = 'http://terminology.hl7.org/CodeSystem/allergyintolerance-verification' and code = 'entered-in-error').exists() or clinicalStatus.exists())
ait-2: AllergyIntolerance.clinicalStatus SHALL NOT be present if verification Status is entered-in-error (: verificationStatus.coding.where(system = 'http://terminology.hl7.org/CodeSystem/allergyintolerance-verification' and code = 'entered-in-error').empty() or clinicalStatus.empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
krcore-alrg-01: 알레르기 및 불내성 반응이 의약품에 의해 유발된 경우, 원인물질을 WHO ATC 코드로 식별. (: (category = 'medication') implies code.coding.where(system ='http://www.whocc.no/atc').exists())
2. AllergyIntolerance.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. AllergyIntolerance.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. AllergyIntolerance.clinicalStatus
Definition

알레르기 또는 불내성의 임상적 상태

Control0..1 This element is affected by the following invariants: ait-1, ait-2
BindingThe codes SHALL be taken from AllergyIntoleranceClinicalStatusCodes

알레르기 또는 불내성의 임상적 상태

TypeCodeableConcept
Is Modifiertrue
Summarytrue
Comments

Refer to discussion if clincalStatus 결과 부재 이유에 대한 코드들.data. The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. AllergyIntolerance.verificationStatus
Definition

Assertion about certainty associated with the propensity, or potential risk, of a reaction to the identified substance (including pharmaceutical product).

Control0..1 This element is affected by the following invariants: ait-1, ait-2
BindingThe codes SHALL be taken from AllergyIntoleranceVerificationStatusCodes

식별된 물질에 대한 반응의 경향 또는 반응의 잠재적 위험과 관련된 확실성에 대한 확인.

TypeCodeableConcept
Is Modifiertrue
Summarytrue
Comments

The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. AllergyIntolerance.category
Definition

Category of the identified substance.

Control0..*
BindingThe codes SHALL be taken from AllergyIntoleranceCategory

알레르기 또는 불내성과 관련된 확인된 물질의 범주.

Typecode
Summarytrue
Alternate NamesCategory, Type, Reaction Type, Class
Comments

This data element has been included because it is currently being captured in some clinical systems. This data can be derived from the substance where coding systems are used, and is effectively redundant in that situation. When searching on category, consider the implications of AllergyIntolerance resources without a category. For example, when searching on category = medication, medication allergies that don't have a category valued will not be returned. Refer to search for more information on how to search category with a :missing modifier to get allergies that don't have a category. Additionally, category should be used with caution because category can be subjective based on the sender.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. AllergyIntolerance.code
Definition

Code for an allergy or intolerance statement (either a positive or a negated/excluded statement). This may be a code for a substance or pharmaceutical product that is considered to be responsible for the adverse reaction risk (e.g., "Latex"), an allergy or intolerance condition (e.g., "Latex allergy"), or a negated/excluded code for a specific substance or class (e.g., "No latex allergy") or a general or categorical negated statement (e.g., "No known allergy", "No known drug allergies"). Note: the substance for a specific reaction may be different from the substance identified as the cause of the risk, but it must be consistent with it. For instance, it may be a more specific substance (e.g. a brand medication) or a composite product that includes the identified substance. It must be clinically safe to only process the 'code' and ignore the 'reaction.substance'. If a receiving system is unable to confirm that AllergyIntolerance.reaction.substance falls within the semantic scope of AllergyIntolerance.code, then the receiving system should ignore AllergyIntolerance.reaction.substance.

Control10..1
BindingFor example codes, see AllergyIntoleranceSubstance/Product,ConditionAndNegationCodes
TypeCodeableConcept
Must Supporttrue
Summarytrue
Alternate NamesCode
Comments

It is strongly recommended that this element be populated using a terminology, where possible. For example, some terminologies used include RxNorm, SNOMED CT, DM+D, NDFRT, ICD-9, IDC-10, UNII, and ATC. Plain text should only be used if there is no appropriate terminology available. Additional details can be specified in the text.

When a substance or product code is specified for the 'code' element, the "default" semantic context is that this is a positive statement of an allergy or intolerance (depending on the value of the 'type' element, if present) condition to the specified substance/product. In the corresponding SNOMED CT allergy model, the specified substance/product is the target (destination) of the "Causative agent" relationship.

The 'substanceExposureRisk' extension is available as a structured and more flexible alternative to the 'code' element for making positive or negative allergy or intolerance statements. This extension provides the capability to make "no known allergy" (or "no risk of adverse reaction") statements regarding any coded substance/product (including cases when a pre-coordinated "no allergy to x" concept for that substance/product does not exist). If the 'substanceExposureRisk' extension is present, the AllergyIntolerance.code element SHALL be omitted.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. AllergyIntolerance.code.coding
Definition

A reference to a code defined by a terminology system.

Control0..*
TypeCoding
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AllergyIntolerance.code.coding. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
9. AllergyIntolerance.code.coding:ATC
SliceNameATC
Definition

A reference to a code defined by a terminology system.

Control0..1*
BindingThe codes SHALL be taken from ATC CodesFor codes, see (unbound)
TypeCoding
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. AllergyIntolerance.code.coding:ATC.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control10..1
Typeuri
Must Supporttrue
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Fixed Valuehttp://www.whocc.no/atc
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. AllergyIntolerance.code.coding:ATC.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control10..1
Typecode
Must Supporttrue
Summarytrue
Requirements

Need to refer to a particular code in the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. AllergyIntolerance.code.text
Definition

국가별 언어.representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. AllergyIntolerance.patient
Definition

The patient who has the allergy or intolerance.

Control1..1
TypeReference(KRCore_Patient|Patient)
Summarytrue
Alternate NamesPatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. AllergyIntolerance.onset[x]
Definition

상태가 시작된 추정 또는 실제 날짜/일시/연령 when allergy or intolerance was identified.

Control0..1
TypeChoice of: dateTime, Age, Period, Range, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AllergyIntolerance.onset[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
15. AllergyIntolerance.onset[x]:onsetDateTime
SliceNameonsetDateTime
Definition

상태가 시작된 추정 또는 실제 날짜/일시/연령 when allergy or intolerance was identified.

Control0..1
TypeChoice of: dateTime, string, Period, Range, Age
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. AllergyIntolerance.reaction
Definition

Details about each adverse reaction event linked to exposure to the identified substance.

Control0..*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. AllergyIntolerance.reaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
18. AllergyIntolerance.reaction.manifestation
Definition

Clinical symptoms and/or signs that are observed or associated with the adverse reaction event.

Control1..*
BindingFor example codes, see SNOMEDCTClinicalFindings

이상 반응 이벤트와 관련하여 관찰되거나 관련된 임상 증상 및/또는 징후.

TypeCodeableConcept
Summaryfalse
Alternate NamesSymptoms, Signs
Comments

Manifestation can be expressed as a single word, phrase or brief description. For example: nausea, rash or no reaction. It is preferable that manifestation should be coded with a terminology, where possible. The values entered here may be used to display on an application screen as part of a list of adverse reactions, as recommended in the UK NHS CUI guidelines. Terminologies commonly used include, but are not limited to, SNOMED CT or ICD10.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. AllergyIntolerance.reaction.manifestation.text
Definition

국가별 언어.representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. AllergyIntolerance
Definition

Risk of harmful or undesirable, physiological response which is unique to an individual and associated with exposure to a substance.

Control0..*
Summaryfalse
Alternate NamesAllergy, Intolerance, Adverse Reaction
Comments

Substances include, but are not limited to: a therapeutic substance administered correctly at an appropriate dosage for the individual; food; material derived from plants or animals; or venom from insect stings.

2. AllergyIntolerance.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. AllergyIntolerance.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. AllergyIntolerance.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. AllergyIntolerance.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
추가 바인딩목적
AllLanguagesMax Binding
Typecode
Summaryfalse
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. AllergyIntolerance.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. AllergyIntolerance.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. AllergyIntolerance.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. AllergyIntolerance.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. AllergyIntolerance.identifier
Definition

비즈니스 식별자s assigned to this AllergyIntolerance by the performer or other systems which remain constant as the resource is updated and propagates from server to server.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Summarytrue
Requirements

Allows identification of the AllergyIntolerance as it is known by various participating systems and in a way that remains consistent across servers.

Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. AllergyIntolerance.clinicalStatus
Definition

알레르기 또는 불내성의 임상적 상태

Control0..1 This element is affected by the following invariants: ait-1, ait-2
BindingThe codes SHALL be taken from AllergyIntoleranceClinicalStatusCodes The clinical status of the allergy or intolerance
TypeCodeableConcept
Is Modifiertrue
Summarytrue
Comments

Refer to discussion if clincalStatus 결과 부재 이유에 대한 코드들.data. The data type is CodeableConcept because clinicalStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. AllergyIntolerance.verificationStatus
Definition

Assertion about certainty associated with the propensity, or potential risk, of a reaction to the identified substance (including pharmaceutical product).

Control0..1 This element is affected by the following invariants: ait-1, ait-2
BindingThe codes SHALL be taken from AllergyIntoleranceVerificationStatusCodes Assertion about certainty associated with a propensity, or potential risk, of a reaction to the identified substance
TypeCodeableConcept
Is Modifiertrue
Summarytrue
Comments

The data type is CodeableConcept because verificationStatus has some clinical judgment involved, such that there might need to be more specificity than the required FHIR value set allows. For example, a SNOMED coding might allow for additional specificity.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. AllergyIntolerance.type
Definition

Identification of the underlying physiological mechanism for the reaction risk.

Control0..1
BindingThe codes SHALL be taken from AllergyIntoleranceType Identification of the underlying physiological mechanism for a Reaction Risk
Typecode
Summarytrue
Alternate NamesCategory, Class
Comments

Allergic (typically immune-mediated) reactions have been traditionally regarded as an indicator for potential escalation to significant future risk. Contemporary knowledge suggests that some reactions previously thought to be immune-mediated are, in fact, non-immune, but in some cases can still pose a life threatening risk. It is acknowledged that many clinicians might not be in a position to distinguish the mechanism of a particular reaction. Often the term "allergy" is used rather generically and may overlap with the use of "intolerance" - in practice the boundaries between these two concepts might not be well-defined or understood. This data element is included nevertheless, because many legacy systems have captured this attribute. Immunologic testing may provide supporting evidence for the basis of the reaction and the causative substance, but no tests are 100% sensitive or specific for sensitivity to a particular substance. If, as is commonly the case, it is unclear whether the reaction is due to an allergy or an intolerance, then the type element should be omitted from the resource.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. AllergyIntolerance.category
Definition

Category of the identified substance.

Control0..*
BindingThe codes SHALL be taken from AllergyIntoleranceCategory Category of an identified substance associated with allergies or intolerances
Typecode
Summarytrue
Alternate NamesCategory, Type, Reaction Type, Class
Comments

This data element has been included because it is currently being captured in some clinical systems. This data can be derived from the substance where coding systems are used, and is effectively redundant in that situation. When searching on category, consider the implications of AllergyIntolerance resources without a category. For example, when searching on category = medication, medication allergies that don't have a category valued will not be returned. Refer to search for more information on how to search category with a :missing modifier to get allergies that don't have a category. Additionally, category should be used with caution because category can be subjective based on the sender.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. AllergyIntolerance.criticality
Definition

Estimate of the potential clinical harm, or seriousness, of the reaction to the identified substance.

Control0..1
BindingThe codes SHALL be taken from AllergyIntoleranceCriticality Estimate of the potential clinical harm, or seriousness, of a reaction to an identified substance
Typecode
Summarytrue
Alternate NamesSeverity, Seriousness, Contra-indication, Risk
Comments

The default criticality value for any propensity to an adverse reaction should be 'Low Risk', indicating at the very least a relative contraindication to deliberate or voluntary exposure to the substance. 'High Risk' is flagged if the clinician has identified a propensity for a more serious or potentially life-threatening reaction, such as anaphylaxis, and implies an absolute contraindication to deliberate or voluntary exposure to the substance. If this element 결과 부재 이유에 대한 코드들. the criticality is unknown (though it may be known elsewhere). Systems that capture a severity at the condition level are actually representing the concept of criticality whereas the severity documented at the reaction level is representing the true reaction severity. Existing systems that are capturing both condition criticality and reaction severity may use the term "severity" to represent both. Criticality is the worst it could be in the future (i.e. situation-agnostic) whereas severity is situation-dependent.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. AllergyIntolerance.code
Definition

Code for an allergy or intolerance statement (either a positive or a negated/excluded statement). This may be a code for a substance or pharmaceutical product that is considered to be responsible for the adverse reaction risk (e.g., "Latex"), an allergy or intolerance condition (e.g., "Latex allergy"), or a negated/excluded code for a specific substance or class (e.g., "No latex allergy") or a general or categorical negated statement (e.g., "No known allergy", "No known drug allergies"). Note: the substance for a specific reaction may be different from the substance identified as the cause of the risk, but it must be consistent with it. For instance, it may be a more specific substance (e.g. a brand medication) or a composite product that includes the identified substance. It must be clinically safe to only process the 'code' and ignore the 'reaction.substance'. If a receiving system is unable to confirm that AllergyIntolerance.reaction.substance falls within the semantic scope of AllergyIntolerance.code, then the receiving system should ignore AllergyIntolerance.reaction.substance.

Control1..1
BindingFor example codes, see AllergyIntoleranceSubstance/Product,ConditionAndNegationCodes
TypeCodeableConcept
Must Supporttrue
Summarytrue
Alternate NamesCode
Comments

It is strongly recommended that this element be populated using a terminology, where possible. For example, some terminologies used include RxNorm, SNOMED CT, DM+D, NDFRT, ICD-9, IDC-10, UNII, and ATC. Plain text should only be used if there is no appropriate terminology available. Additional details can be specified in the text.

When a substance or product code is specified for the 'code' element, the "default" semantic context is that this is a positive statement of an allergy or intolerance (depending on the value of the 'type' element, if present) condition to the specified substance/product. In the corresponding SNOMED CT allergy model, the specified substance/product is the target (destination) of the "Causative agent" relationship.

The 'substanceExposureRisk' extension is available as a structured and more flexible alternative to the 'code' element for making positive or negative allergy or intolerance statements. This extension provides the capability to make "no known allergy" (or "no risk of adverse reaction") statements regarding any coded substance/product (including cases when a pre-coordinated "no allergy to x" concept for that substance/product does not exist). If the 'substanceExposureRisk' extension is present, the AllergyIntolerance.code element SHALL be omitted.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. AllergyIntolerance.code.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
18. AllergyIntolerance.code.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on AllergyIntolerance.code.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
19. AllergyIntolerance.code.coding
Definition

A reference to a code defined by a terminology system.

Control0..*
TypeCoding
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AllergyIntolerance.code.coding. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ $this
20. AllergyIntolerance.code.coding:ATC
SliceNameATC
Definition

A reference to a code defined by a terminology system.

Control0..1
BindingThe codes SHALL be taken from ATC Codes
TypeCoding
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. AllergyIntolerance.code.coding:ATC.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
22. AllergyIntolerance.code.coding:ATC.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on AllergyIntolerance.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
23. AllergyIntolerance.code.coding:ATC.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Must Supporttrue
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Fixed Valuehttp://www.whocc.no/atc
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. AllergyIntolerance.code.coding:ATC.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Summarytrue
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. AllergyIntolerance.code.coding:ATC.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control1..1
Typecode
Must Supporttrue
Summarytrue
Requirements

Need to refer to a particular code in the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. AllergyIntolerance.code.coding:ATC.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control0..1
Typestring
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. AllergyIntolerance.code.coding:ATC.userSelected
Definition

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. AllergyIntolerance.code.text
Definition

국가별 언어.representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. AllergyIntolerance.patient
Definition

The patient who has the allergy or intolerance.

Control1..1
TypeReference(KRCore_Patient)
Summarytrue
Alternate NamesPatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. AllergyIntolerance.encounter
Definition

The encounter when the allergy or intolerance was asserted.

Control0..1
TypeReference(Encounter)
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. AllergyIntolerance.onset[x]
Definition

상태가 시작된 추정 또는 실제 날짜/일시/연령 when allergy or intolerance was identified.

Control0..1
TypeChoice of: dateTime, Age, Period, Range, string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on AllergyIntolerance.onset[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
32. AllergyIntolerance.onset[x]:onsetDateTime
SliceNameonsetDateTime
Definition

상태가 시작된 추정 또는 실제 날짜/일시/연령 when allergy or intolerance was identified.

Control0..1
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. AllergyIntolerance.recordedDate
Definition

The recordedDate represents when this particular AllergyIntolerance record was created in the system, which is often a system-generated date.

Control0..1
TypedateTime
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. AllergyIntolerance.recorder
Definition

Individual who recorded the record and takes responsibility for its content.

Control0..1
TypeReference(Practitioner|PractitionerRole|Patient|RelatedPerson)
Summaryfalse
Alternate NamesAuthor
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. AllergyIntolerance.asserter
Definition

The source of the information about the allergy that is recorded.

Control0..1
TypeReference(Patient|RelatedPerson|Practitioner|PractitionerRole)
Summarytrue
Alternate NamesSource, Informant
Comments

The recorder takes responsibility for the content, but can reference the source from where they got it.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. AllergyIntolerance.lastOccurrence
Definition

Represents the date and/or time of the last known occurrence of a reaction event.

Control0..1
TypedateTime
Summaryfalse
Comments

This date may be replicated by one of the Onset of Reaction dates. Where a textual representation of the date of last occurrence is required e.g. 'In Childhood, '10 years ago' the Comment element should be used.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. AllergyIntolerance.note
Definition

Additional narrative about the propensity for the Adverse Reaction, not captured in other fields.

Control0..*
TypeAnnotation
Summaryfalse
Comments

For example: including reason for flagging a seriousness of 'High Risk'; and instructions related to future exposure or administration of the substance, such as administration within an Intensive Care Unit or under corticosteroid cover. The notes should be related to an allergy or intolerance as a condition in general and not related to any particular episode of it. For episode notes and descriptions, use AllergyIntolerance.event.description and AllergyIntolerance.event.notes.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. AllergyIntolerance.reaction
Definition

Details about each adverse reaction event linked to exposure to the identified substance.

Control0..*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. AllergyIntolerance.reaction.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
40. AllergyIntolerance.reaction.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
41. AllergyIntolerance.reaction.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
42. AllergyIntolerance.reaction.substance
Definition

Identification of the specific substance (or pharmaceutical product) considered to be responsible for the Adverse Reaction event. Note: the substance for a specific reaction may be different from the substance identified as the cause of the risk, but it must be consistent with it. For instance, it may be a more specific substance (e.g. a brand medication) or a composite product that includes the identified substance. It must be clinically safe to only process the 'code' and ignore the 'reaction.substance'. If a receiving system is unable to confirm that AllergyIntolerance.reaction.substance falls within the semantic scope of AllergyIntolerance.code, then the receiving system should ignore AllergyIntolerance.reaction.substance.

Control0..1
BindingFor example codes, see SubstanceCode Codes defining the type of the substance (including pharmaceutical products)
TypeCodeableConcept
Summaryfalse
Comments

Coding of the specific substance (or pharmaceutical product) with a terminology capable of triggering decision support should be used wherever possible. The 'code' element allows for the use of a specific substance or pharmaceutical product, or a group or class of substances. In the case of an allergy or intolerance to a class of substances, (for example, "penicillins"), the 'reaction.substance' element could be used to code the specific substance that was identified as having caused the reaction (for example, "amoxycillin"). Duplication of the value in the 'code' and 'reaction.substance' elements is acceptable when a specific substance has been recorded in 'code'.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. AllergyIntolerance.reaction.manifestation
Definition

Clinical symptoms and/or signs that are observed or associated with the adverse reaction event.

Control1..*
BindingFor example codes, see SNOMEDCTClinicalFindings Clinical symptoms and/or signs that are observed or associated with an Adverse Reaction Event
TypeCodeableConcept
Summaryfalse
Alternate NamesSymptoms, Signs
Comments

Manifestation can be expressed as a single word, phrase or brief description. For example: nausea, rash or no reaction. It is preferable that manifestation should be coded with a terminology, where possible. The values entered here may be used to display on an application screen as part of a list of adverse reactions, as recommended in the UK NHS CUI guidelines. Terminologies commonly used include, but are not limited to, SNOMED CT or ICD10.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
44. AllergyIntolerance.reaction.manifestation.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
45. AllergyIntolerance.reaction.manifestation.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on AllergyIntolerance.reaction.manifestation.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
46. AllergyIntolerance.reaction.manifestation.coding
Definition

A reference to a code defined by a terminology system.

Control0..*
TypeCoding
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
47. AllergyIntolerance.reaction.manifestation.text
Definition

국가별 언어.representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. AllergyIntolerance.reaction.description
Definition

Text description about the reaction as a whole, including details of the manifestation if required.

Control0..1
Typestring
Summaryfalse
Alternate NamesNarrative, Text
Comments

Use the description to provide any details of a particular event of the occurred reaction such as circumstances, reaction specifics, what happened before/after. Information, related to the event, but not describing a particular care should be captured in the comment field. For example: at the age of four, the patient was given penicillin for strep throat and subsequently developed severe hives.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. AllergyIntolerance.reaction.onset
Definition

Record of the date and/or time of the onset of the Reaction.

Control0..1
TypedateTime
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
50. AllergyIntolerance.reaction.severity
Definition

Clinical assessment of the severity of the reaction event as a whole, potentially considering multiple different manifestations.

Control0..1
BindingThe codes SHALL be taken from AllergyIntoleranceSeverity Clinical assessment of the severity of a reaction event as a whole, potentially considering multiple different manifestations
Typecode
Summaryfalse
Comments

It is acknowledged that this assessment is very subjective. There may be some specific practice domains where objective scales have been applied. Objective scales can be included in this model as extensions.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. AllergyIntolerance.reaction.exposureRoute
Definition

Identification of the route by which the subject was exposed to the substance.

Control0..1
BindingFor example codes, see SNOMEDCTRouteCodes A coded concept describing the route or physiological path of administration of a therapeutic agent into or onto the body of a subject
TypeCodeableConcept
Summaryfalse
Comments

Coding of the route of exposure with a terminology should be used wherever possible.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. AllergyIntolerance.reaction.note
Definition

Additional text about the adverse reaction event not captured in other fields.

Control0..*
TypeAnnotation
Summaryfalse
Comments

Use this field to record information indirectly related to a particular event and not captured in the description. For example: Clinical records are no longer available, recorded based on information provided to the patient by her mother and her mother is deceased.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))